parmodify2.1m (2010 09)
p
parmodify2(1M)
For OA Based Partition Management Systems
parmodify2(1M)
changes in the parspec. If the parspec change policy is disabled, the affected parti-
tion operation is failed and no changes are made to the parspec.
RETURN VALUE
The
parmodify command exits with one of the following values:
0 Successful completion.
1 Error condition occurred.
EXAMPLES
Add a new blade in enclosure 1 slot 3 to the existing nPartition 2 and activate it.
parmodify -p 2 -a blade:1/3:base:y:ri:50% -B
Add IO bay 2 in enclosure 6 to the existing nPartition 2.
parmodify -p 2 -a io:6/2:
delete a blade in enclosure 1 slot 3 from the existing nPartition 2.
parmodify -p 2 -d blade:1/3
Copy parspec of partition 1 to a new parspec called
copy1_parspec.
parmodify -p 1 -c copy1_parspec
Modify parpspec AltSpec to add a new blade in enclosure 1 slot 3.
parmodify -Z AltSpec -a blade:1/3:base:y:ri:50% -B
ERRORS
OA syslog contains additional description of errors encountered during partition operations. Users can
view the OA syslog from the OA using the SHOW SYSLOG OA command.
Error: System unable to accept partition commands
The above error message is printed out under the following circumstances:
• Attempting to run command from an OA other than the active OA in enclosure 1.
• System has been shut down (e.g. with POWEROFF XFABRIC, or ambient overtemp).
• The OA has not finished initializing.
In the above scenarios, please ensure the system and OA are completely up and you are running the com-
mand from the active OA in enclosure 1.
AUTHOR
parmodify was developed by the Hewlett-Packard Company.
SEE ALSO
On OA:
"help parcreate", "help pardefault", "help parperm", "help parremove", "help parstatus", "help parspec",
"help resourcepath".
On HP-UX:
parcreate(1M), pardefault(1M), parperm(1M), parremove(1M), parstatus(1M), parspec(5), resour-
cepath(5).
6 Hewlett-Packard Company − 6 − HP-UX 11i Version 3: September 2010