sd.5 (2011 03)

s
sd(5) sd(5)
logfile, and the source agent logfile by prepending identification numbers to SD logfile
messages. This information is in addition to the detail controlled by the
logdetail
option. See logdetail for more information.
A value of:
0 provides no information to the log files.
1 enables verbose logging to the log files.
2 enables very verbose logging to the log files.
Applies to
swconfig, swcopy, swinstall,
swmodify, swpackage, swremove,
and
swverify.
lookupcache_timeout_minutes=10
Controls the time in minutes to cache and re-use the results of hostname or IP address
resolution lookups. A value of 0 disables the facility to cache and re-use lookup results.
The maximum value allowed is 10080 minutes, which is one week.
A value of:
0 disables the lookup caching mechanism.
10080 is the maximum value allowed.
Applies to
sd, swacl, swagentd,
swask, swconfig, swcopy, swinstall, swjob,
swlist, swmodify, swpackage, swreg, swremove, and swverify.
match_target=false
If set to true, software selection is done by locating filesets on the source that match the
target system’s installed filesets. If multiple targets are specified, the first in the list is
used as the basis for selections.
Applies to
swinstall.
max_agents=-1
The maximum number of agents that are permitted to run simultaneously. The value of
-1 means that there is no limit.
Applies to
swagentd.
max_targets=25
When set to a positive integer, this option limits the number of concurrent install or copy
operations to the number specified. As each copy or install operation completes, another
target is selected and started until all targets are completed.
Server and network performance determines the optimal setting; a recommended start-
ing point is 25 (the default value). If you set this option to a value of less than one, SD
attempts to install or copy to all targets at once.
Applies to
swcopy and swinstall.
media_capacity=1330
If creating a distribution tape or multiple-directory media such as a CD-ROM, this key-
word specifies the capacity of the tape in one million byte units (not Mbytes). This option
is required if the media is not a DDS tape or a disk file. Without this option, swpack-
age sets the size to the default of 1,330 Mbytes for tape or to the amount of free space on
the disk up to minfree for a disk file. SD uses the same format across multiple direc-
tory media as it does for multiple serial media, including calculations of the correct size
based partitioning of filesets and setting of the media_sequence_number attributes.
Applies to
swpackage.
media_type=directory
Defines the type of distribution to create. The recognized types are directory and
tape.
Applies to
swpackage.
minimum_job_polling_interval=1
Defines in minutes how often the daemon wakes up to scan the job queue for scheduled
jobs that must start. If set to 0, no scheduled jobs are initiated.
Applies to
swagentd.
HP-UX 11i Version 3: March 2011 − 19 − Hewlett-Packard Company 19