smfi_setdbg.3n (2010 09)

s
smfi_setdbg(3N) smfi_setdbg(3N)
NAME
smfi_setdbg() - sets the debugging (tracing) level for the Milter library, for sendmail
SYNOPSIS
#include <libmilter/mfapi.h>
int smfi_setdbg(
int level ;
);
PARAMETERS
level Specifies the debugging level.
DESCRIPTION
The
smfi_setdbg()
routine sets the internal debugging level of the Milter library for tracing pur-
poses, for sendmail.
A level of 0 (zero) turns off debugging.
A detailed dubugging can be obtained with a higher (> 0) debugging level. The highest and most useful
debugging level is 6.
smfi_setdbg() can be called from any routine at any point in a function.
RETURN VALUE
By default, the
smfi_setdbg()
routine returns MI_SUCCESS.
AUTHOR
The
smfi_setdbg() routine was developed by the Sendmail Inc.
SEE ALSO
smfi_main(3N), smfi_register(3N), smfi_setconn(3N), smfi_settimeout(3N), smfi_opensocket(3N),
smfi_setbacklog(3N), smfi_stop(3N).
Sendmail 8.13.3 Programmer’s Guide on http://www.hp.com/go/hpux-networking-docs
.
HP-UX 11i Version 3: September 2010 − 1 − Hewlett-Packard Company 1