strvf.1m (2010 09)

strvf(1M) strvf(1M)

NAME

strvf - STREAMS veriﬁcation tool

SYNOPSIS

strvf [-v]

DESCRIPTION

strvf executes a series of subcommands that verify whether or not STREAMS is currently installed and

conﬁgured on your system. All output is sent to

stdout. Verbose output is always sent to the logﬁle

/var/adm/streams/strvf.log

These subcommands make sure that the STREAMS kernel daemons are running and that

open(),

putmsg(), getmsg(), ioctl(), and close()

can be performed on /dev/echo.

Options

-v Speciﬁes verbose output to be displayed

EXAMPLES

strvf Verify STREAMS is working. Brief summary of status is displayed on screen. Ver-

bose description of each subcommand and its status is copied to the logﬁle.

strvf -v Verify STREAMS is working. Verbose description of each subcommand and its

status is displayed on the screen and copied to the logﬁle. This option is useful in

troubleshooting strvf

failures.

FILES

/var/adm/streams/strvf.log

Logﬁle containing a verbose description and status of all sub-

commands.

/dev/echo Loopback STREAMS driver used by strvf.

PAGE 1
strvf(1M) strvf(1M) NAME strvf - STREAMS verification tool SYNOPSIS strvf [-v] DESCRIPTION strvf executes a series of subcommands that verify whether or not STREAMS is currently installed and configured on your system. All output is sent to stdout. Verbose output is always sent to the logfile /var/adm/streams/strvf.log. These subcommands make sure that the STREAMS kernel daemons are running and that open(), putmsg(), getmsg(), ioctl(), and close() can be performed on /dev/echo.
PAGE 2
(Notes) A (Notes) sA 2 Hewlett-Packard Company −1− HP-UX 11i Version 3: September 2010