swverify.1m (2011 03)

s
swverify(1M) swverify(1M)
Target Log
A swagent process performs the actual verify operation at each target_selection. When verifying
installed software, the
swagent logs messages to the file
var/adm/sw/swagent.log
beneath
the root directory (for example,
/ or an alternate root directory). When verifying available
software (within a depot), the swagent logs messages to the file swagent.log beneath the depot
directory (for example,
/var/spool/sw
).
Command and target log files can be viewed using the
swjob command.
swagentd Disabled
If the
swagentd daemon has been disabled on the host, it can be enabled by the host’s system adminis-
trator by setting the SW_ENABLE_SWAGENTD
entry in /etc/rc.config.d/swconfig
to 1 and exe-
cuting
/usr/sbin/swagentd -r
.
EXAMPLES
Verify the C and Pascal products installed at the local host:
swverify cc pascal
Verify a particular version of HP Omniback:
swverify Omniback,1=/opt/Omniback_v2.0
Verify the entire contents of a local depot:
swverify -d \* @ /var/spool/sw
Verify the entire contents of a system:
swverify \*
Verify the C and Pascal products on remote hosts:
swverify cc pascal @ hostA hostB hostC
Verify the entire contents of a local depot from the directory depot
/tmp/software while in the direc-
tory
/tmp:
swverify \* @ ./software
FILES
$HOME/.swdefaults
Contains the user-specific default values for some or all SD options.
$HOME/.sw/sessions/
Contains session files automatically saved by the SD commands, or explicitly saved by the user.
/usr/lib/sw/sys.defaults
Contains the master list of current SD options with their default values.
/var/adm/sw/
The directory which contains all the configurable and non-configurable data for SD. This directory
is also the default location of logfiles.
/var/adm/sw/defaults
Contains the active system-wide default values for some or all SD options.
/var/adm/sw/getdate.templ
Contains the set of date/time templates used when scheduling jobs.
/var/adm/sw/products/
The Installed Products Database (IPD), a catalog of all products installed on a system.
/var/spool/sw/
The default location of a target software depot.
AUTHOR
swverify was developed by the Hewlett-Packard Company.
SEE ALSO
install-sd(1M), swacl(1M), swagentd(1M), swask(1M), swconfig(1M), swcopy(1M), swinstall(1M),
swjob(1M), swlist(1M), swmodify(1M), swpackage(1M), swreg(1M), swremove(1M), sd(4), swpackage(4),
sd(5).
HP-UX 11i Version 3: March 2011 − 11 − Hewlett-Packard Company 11