vparresources.5 (2010 09)

vparresources(5) vparresources(5)

Table III.q. Task: -d cpu::num

Explanation Deletes num non-CLPs from the vPar’s total

conﬁguration.

Value A positive integer

Usage The vPar must be assigned at least num

Restrictions non-CLP, non-user-speciﬁed CPUs.

The new total number of CPUs >= min

Table III.r. Task: -d io:path[:

attr1[,attr2]]

Explanation Removes the speciﬁed attributes of the resource

leaving any previously assigned attributes

unchanged and the resource itself assigned to the

vPar. If no attribute is speciﬁed, removes the

resource and all its attributes.

Value path: A text string of the form returned

by the ioscan command,

such as "0/0/6"

attr: One or both of the case-insensitive

attribute strings ALTBOOT, TAPE and BOOT.

If more than one are speciﬁed, then they

must be separated by a comma (",").

Usage The vPar must not be running.

Restrictions

The I/O resource must be assigned to the target vPar.

Usage Deleting an attribute from an I/O device does

Guidelines not cause it to be assigned to another. You

must do that in a separate option or command.

At most one device can be assigned the ALTBOOT, TAPE

and BOOT attributes.

Caution: You should assign attributes to appropriate

devices, but this is not checked. For example,

ALTBOOT and BOOT should be assigned to a disk and

TAPE should be assigned to a tape device. Failure to

do this may result in an unbootable partition.

HP-UX 11i Version 3: September 2010 − 27 − Hewlett-Packard Company 27