HP Integrity Virtual Machines 4.2.5: Release Notes

to properly run or even boot. If the guest boot was already attempted before the patch was installed,
installing the patch by itself does not prevent the problem. Reconfiguration of dynamic memory
settings is necessary for the guest to be able to boot again.
As a workaround, disable Integrity VM dynamic memory for the particular guest using the following
command:
# hpvmmodify -P $ {guest_name} -x ram_dyn_type=none
Once you have installed patch PHSS_41543 (or later), you can safely re-enable Integrity VM
dynamic memory for that guest, which provides the manageability features for HP-UX guests, with
the following command:
# hpvmmodify -P ${guest_name} -x ram_dyn_type=any
If ram_dyn_target_start and ram_dyn_max have already been set, change their values to
the desired range, which is dependent on the configured memory size. HP recommends that
ram_dyn_target_start and ram_dyn_min should not fall below 25% or 1 GB (whichever
is higher) of memory configured for the guest. ram_dyn_max should be set to the memory
configured.
2.4 HP-UX Patches Required in the VM Host
Table 3 lists the patches that are required in the VM Host system running Integrity VM A.01.00
and later. For patches required for earlier versions of Integrity VM, consult the Release Notes
document for that version. For the most up-to-date patch list, see the HP ITRC website: http://
www.itrc.hp.com.
Table 3 VM Host Patches
CommentDescription/ImpactFixAffected Integrity VM
Version
Affected HP-UX (VM
Host) Version
This patch incorporated
into 0512 update.
FSSPHKL_33052
(11.23.0512)
A.01.20 or later11i v2 0505 through
0509
Resolves panic on host.Bug fixPHKL_34082
(11.23.0609)
A.01.20 or later11i v2 0505 through
0606
Fixes a problem of a
panic on the VM Host.
Likely on Integrity VM
V2.0 as HP-UX guests
in V1.0 do not do what
the Windows guests do
in V2.0 (ping the
guest).
Bug fixPHNE_33724
(11.23.0706)
A.02.00 or later11i v2 0512 or later
Required when using
linkloop over VLANs
between guest and VM
Host VLAN.
Bug fixPHNE_34474A.02.00 or later11i v2 0505 or later
Resolves potential
corruption of guest
configuration,
cimserver, or other
WBEM files when
under extreme load.
Download HP WBEM
Services for HP-UX
Product Bundle
B8465BA from the HP
software depot.
Bug fixCimserver 02.00.09
PHSS_34429
A.01.00 or later11i v2 0505 or later
2.4 HP-UX Patches Required in the VM Host 27