HP Matrix Operating Environment 7.2 Update 1 Infrastructure Orchestration User Guide

Configuring Ignite-UX
Matrix infrastructure orchestration supports Ignite-UX version C.7.11.439 (HP-UX 11.31 1009) or
later for HP-UX 11iv3 deployment. (HP-UX 11iv3 0709 or later is required for Integrity VM.)
The Ignite server must have NFS configured and the tftp and bootps services enabled in /etc/
inetd.conf.
a. To set up NFS and export the directories Ignite needs, run:
/opt/ignite/lbin/setup_server –n
b. To enable tftp and bootps services, edit /etc/inetd/conf, and uncomment the "tftp" and
"bootps" lines and then run:
inetd –c
Depending on the client being installed (for example, if the client has a graphics card or keyboard
attached), the system may prompt to identify the keyboard language. To avoid this, edit /var/
opt/ignite/config.local by adding the following line:
_hp_keyboard="USB_PS2_DIN_US_English"
NOTE: Only HP-UX release 11.31 1003 or later can be installed on the following Integrity
blades:
• BL860c i2
• BL870c i2
• BL890
• BL890c i2
The complete list of documentation for Ignite-UX is available at http://hp.com/go/ignite-ux.
Discovering the Ignite-UX deployment server
Matrix infrastructure orchestration provisioning requires that the Ignite-UX deployment server is
discovered or rediscovered.
To discover a Ignite-UX deployment server in Systems Insight Manager:
1. Select Options→Discovery.
2. Create or edit a group (for example, Deployment Servers).
3. In Ping inclusion ranges, system (hosts) names, and/or hosts files, enter the IP address or
FQDN.
Configuring deployment servers 37