Administrator's and User's Guide for SFM HP-UX 11i v3 March 2012

NOTE: The following apply to indication providers:
• The terms events and indications are used interchangeably.
• Although both EMS Wrapper provider and EVM CIM provider generate events related to
system hardware, the nature of events are different.
In addition, the support for CPUIndicationProvider and MemoryIndicationProvider has been added
with additional support for hardware events on HP Integrity BL860c i2, BL870c i2 &
BL890c i2 Server Blades. The support for MemoryIndicationProvider has been added for
Legacy memory events and that for MemoryIndicationProviderIA for HP Integrity BL860c
i2, BL870c i2 & BL890c i2 Server Blades, HP Integrity Superdome 2 and
rx2800 i2 servers. For the listing of new events reported by SFM on these indication providers,
see the SFM Event Descriptions.
CIMOM identifies the SFM providers using SFMProviderModule. If a provider is not working
properly, SFMProviderModule stops all the SFM providers.
Table 3 Instance / Indication providers support
IA NGIS providers
2
IA legacy provider
1
PA-RISC providerInstance / Indication providers
√√√CPUProvider and
CPUStatusProvider
√√
Supported only on BL860c
i2, BL870c i2 & BL890c i2
ХBladeProvider and
BladeStatusProvider
ХХ√EMDProvider
√√√Environmental
√
Not supported on HP
Superdome 2
√
Supported only on BL860c
i2, BL870c i2 & BL890c i2
√Memory provider and
MemoryStatus provider
√√
Supported only on BL860c
i2, BL870c i2 & BL890c i2
ХEnclosureProvider and
EnclosureStatusProvider
√√√MPProvider and MPStatusProvider
√√√CSChassisProvider
√√√RecordLog provider
√
Not supported on HP
Superdome 2
√√Field Replaceable Unit (FRU)
instance provider
Х√√EMS Wrapper provider
√√ХEVM CIM provider
√√√SFMIndicationProvider
√
Not supported on HP
Superdome 2
√XMCAIndicationProvider
√√√Temperature Sensor
√√√Firmware Revision provider
X√√StatusChangeIndication provider
14 Introduction