Administrator's and User's Guide for SFM HP-UX 11i v3 March 2012

Sending test event for memory monitor.
NOTE: You can also send test events for other devices that the SFMIndicationProvider monitors.
For information on the devices monitored by the SFMIndicationProvider, see Table 2 (page 12).
To view the list of events, enter the following command at the HP-UX prompt:
# evweb eventviewer -L
A list of events along with the details such as event number, severity, and event category are
displayed by querying the Event Archive.
To view the details of an event, enter the following command at the HP-UX prompt:
# evweb eventviewer -E -n <event number>
The details of the specified event such as the summary, description, probable cause, and
recommended actions for the error are displayed.
For details on SFM event information, see the event.log file at:
/var/opt/sfm/log/event.log
For all events, and for severities logged to syslog, see Table 5 (page 39).
To switch back from the SFM monitoring mode to the EMS monitoring mode, enter the following
command at the HP-UX prompt:
# /opt/sfm/bin/sfmconfig -w -e
Configuring the monitoring mode 31