Administrator's and User's Guide for SFM HP-UX 11i v3 March 2012

6. Click OK on the confirmation message window.
The modified custom solution is displayed on the Detailed Error Information (Administrative
View) pane.
For more information about modifying a custom solution using the HP SMH GUI, select Help
on the action pane of the Modify a Custom Solution page.
Modifying a Custom Solution using the CLI
To modify a custom solution using the CLI, enter the following command at the HP-UX prompt:
# emtui -m <modified text>
Where:
-m is an option used to modify a custom solution.
You can also use the following switches with the -m option:
• -c <cause number>
• -i <error number>
For information about modifying a custom solution using the CLI, see emtui(1).
Deleting a Custom Solution
You can use either the HP SMH GUI or the CLI to delete a custom solution present in the CER.
Deleting a Custom Solution using the GUI
To delete a custom solution using the HP SMH GUI, complete the following steps:
1. Repeat steps 1-5 from “Launching EMT” (page 72).
2. Repeat steps steps 2 and 3 from “Adding a Custom Solution using the GUI” (page 74).
3. Click Delete Selected Solution on the Detailed Error Information (Administrative View) pane.
The Delete a Custom Solution page is displayed. This page displays the custom solution and
the error metadata.
4. Click Delete Selected Solution on the Delete a Custom Solution page.
A confirmation message is displayed.
5. Click OK on the message box.
The custom solution is permanently removed from the CER.
For more information about deleting a custom solution using the HP SMH GUI, select Help on the
action pane of the Delete a Custom Solution page.
Deleting a Custom Solution using the CLI
To delete a custom solution using the CLI, enter the following command at the HP-UX prompt:
# emtui -d -u <user solution number>
Where:
-d is an option used to delete a custom solution present in the CER.
-u is an option used to specify the number associated with the custom solution that you want to
delete.
You can also use the following switches with the -m option:
• -c<cause number>
• -i <error number>
For information on deleting custom solution in the CER using the CLI, see emtui(1).
76 Administering indications and instances using HP SMH