Administrator's and User's Guide for SFM HP-UX 11i v3 March 2012

Table 25 Troubleshooting EVWEB (continued)
SolutionCauseProblem
Version C.06.00.07.01,
September 2009
1. Delete the monitoring request using monconfig. Enter the
following command to delete the monitoring request:
# /etc/opt/resmon/lbin/monconfig
release, to provide a
summary of event
information of critical
2. Select the delete option to delete the request.
(D)elete a monitoring request
and serious events. The
default subscription to
syslog
3. The current monitor configuration is:
1) Send events generated by all monitors
with severity >= MAJOR WARNING to SYSLOG
HP_defaultSyslog is
configured. When events
2) Send events generated by all monitors
with major or critical
with severity >= INFORMATION to TEXTLOG
levels are detected at
/var/opt/resmon/log/event.log
SFM diag mode, an
3) Send events generated by all monitors
event is sent to the EMS
with severity >= MAJOR WARNING to EMAIL root
framework through the
4) Send events generated by monitors
WBEM Wrapper
/storage/events/disks/default
Monitor or the EMS
with severity > CRITICAL to SNMP
Wrapper Monitor. EMS
5) Send events generated by monitors
is configured to log
/storage/events/disks/default
events with Major
with severity > MAJOR WARNING to SNMP
Warning, Serious or
6) Send events generated by monitors
/system/events/ipmi_fpl
Critical severity levels to
with severity = CRITICAL to SNMP
the syslog. Even after
with comment:
switching to the EMS
no
mode, the same
behavior occurs.
7) Send events generated by monitors
/system/events/memory_ia64
/system/events/system_status
with severity = CRITICAL to SNMP
Enter number of monitoring request to delete
{(Q)uit,(H)elp} 1
4. Enter 1 to delete events with MAJOR WARNING severity.
5. To disable the email facility from EMS, delete the following
monitoring request using monconfig:
3) Send events generated by all monitors
with severity >= MAJOR WARNING to EMAIL
root
Install HP Operations Manager Software for UNIX agent (HTTPS)
on HP-UX. Configure a policy used by HTTPS agent to monitor
WBEM indications logged in syslog as follows:
SFM does not provide
the same functionality as
EMS
The OpCmsg notification
is not available in SFM
MMM DD HH:MM:SS xxxxx CIM Indication (default
format):ProviderName =
SEL02_IndicationProvider, PerceivedSeverity =
2, EventID = 103
MMM DD HH:MM:SS xxxxx CIM Indication (default
format):EventID = 8, PerceivedSeverity = 2,
ProviderName = StateChangeIndicationProvider
For more information, see the HP Operations Manager Software
for UNIX documentation.
For the property order logged in syslog, see “ Syslog property
order” (page 120)
92 Troubleshooting SFM