Administrator's and User's Guide for SFM HP-UX 11i v3 March 2012

Table 26 EMT Message File Description (continued)
UsageDescriptionTag
only one cause and one or more corrective
action for a given error message, the Action
tags are associated with the Cause tag. In
such a situation, the Cause_Action tag is not
mandatory. For any error, a cause can be
specified without specifying the corrective
action. However, a corrective action cannot
be specified without specifying a cause.
WBEMDetail EventID=123, AlertType=1,
ProbableCause=7,
Specify WBEM specific details of a
message. The WBEMDetail tag is mandatory
WBEMDetail
EventCategory=21,OtherAlertType=”My own alert
type”OtherSeverity=”My own
Severity”OtherEventCategory=”My own category”
if one of the subsystems specified in the
Header is of type WBEM. The WBEMDetail
tag has the following attributes:
• EventID – This ID must be unique within
a WBEM provider.
• AlertType – The value ranges from 1 to
8.
• ProbableCause – The value ranges from
0 to130.
• EventCategory – The value ranges from
0 to 46.
• OtherSeverity – Required only if Severity
= 1, else it can be omitted.
• OtherAlertType – Required only if
AlertType = 1, else it can be omitted.
• OtherEventCategory – Required only if
EventCategory = 1, else it can be
omitted.
Monitordetail EventNumber=123
Specify the details of a message pertaining
to EMS Monitor. The MonitorDetail tag is
MonitorDetail
mandatory if one of the subsystems specified
in the Header is of type MonitorDetail. For
error messages that are generated by EMS
Monitors or the EMS framework, the
MonitorDetail tag must not be used.
EVMDetail
EVMName=sys.unix.filesystem
Specify the details of a message pertaining
to EVM. The EVMDetail tag is mandatory if
one of the subsystems specified in the
Header is of type EVM.
EVMDetail
NETTLDetail
ErrorID=7,Severity=Information
Specify the details of a message pertaining
to NETTL. The NETTLDetail tag is mandatory
if one of the subsystems specified in the
Header is of type NETTL.
NETTLDetail
95