Logtool Specifications

Hewlett-Packard STM: Logtool ERS * Revision 1.17
- Page 39 - Printed: 02/04/99 3:38 PM
4.4. Commands within the Memory Menu
4.4.1. Clear Log
This command allows the user to clear the memory log file. The user is
cautioned that performing this operation will result in the loss of any data that
was in the memory log file. It is recommended that the user run the Memory
Log-->Detail command to verify that any data in the file is no longer needed.
4.4.2. Set Timer
This command allows the user to change the interval at which the memory
logging daemon polls the memory for errors. The figure below shows the screen
that is presented to the user.
4.4.3. Report Log-->View Dealloc
This command allows the user to view the deallocated page information from
the memory error log file. The memory log file will be formatted and then
displayed to the user. Depending on how many entries are in the file, this may
take a few minutes. A dialog box is displayed to the user telling them how many
entries are in the file. At this point they may either cancel the operation or
continue with the format and display of the file. See the example dialog box and
memory log report figures that follow.