SysMgmtPlus Release Notes, March 2011

Problem: IP protocol end point and auto port aggregation is not displayed on the LAN
information of SMH page.
Resolution: This problem is fixed.
• QXCR1001049931
cprop commands returns erroneous values as shown by echo $.
Problem: While executing various cprop commands, the erroneous return values are obtained
which is shown by echo $.
Resolution: This problem is fixed.
• QXCR1001082428
cprop behavior in non-root environment.
Problem: In non-root environment, cprop displays an error message before the actual
information is displayed. This problem occurs only when options detail and summary is used.
Resolution: Remove this error message in this case.
Known Problems and Workaround
If SysMgmtPlus is installed independently after installing HP SMH, HP SMH must be restarted. (HP
SMH will restart automatically after terminating, and it will terminate automatically if no SMH
connections are present for a period of time (default 30 minutes)).
To stop HP SMH, enter the following commands at the HP-UX prompt:
# /opt/hpsmh/lbin/hpsmh stop
To start HP SMH, enter the following commands at the HP-UX prompt:
# /opt/hpsmh/lbin/hpsmh autostart or just access SMH from browser & it will automatically
restart.
Product Documentation
For the latest information on SysMgmtPlus, see
http://www.hp.com/go/hpux-diagnostics-sysmgmtplus-docs
For information on HP SMH, see
http://www.hp.com/go/smh-docs
Product Structure
Following are the commands you must use to obtain the bundle, product, sub-product, and the
fileset information about the SysMgmtPlus depot:
• Bundle
$ swlist -s <SysMgmtPlus Depot Location>
SysMgmtPlus A.05.00.xx.yy HP-UX SMH Supplemental Functionality
• Product(s)
$ swlist -l product -s <SysMgmtPlus Depot Location>
PropPlus A.05.00.xx HP-UX Property Page Plus
• Sub-product(s)
$ swlist -l subproduct -s <SysMgmtPlus Depot Location>
PropPlus.PropPlus-IAPA Property Page Plus Web UI
• Fileset(s)
2 Contents