ClusterPack V2.5 Release Note

QuickStart Install Instructions

HP-UX 11iv2

• /var - 4GB

• /opt - 4GB

HP-UX 11iv3

• /var - 8GB

• /opt - 4GB

Step 4. Obtain a License File

• Get the Host ID number of the Management Server.

• Contact Hewlett-Packard Licensing Services to redeem your license certificates.

• If you purchased the ClusterPack Base Edition, redeem the Base Edition

license certificate.

NOTE It may take up to 24 hours to receive the license file. Plan

accordingly.

Step 5. Prepare Hardware Access

Get a serial console cable long enough to reach all the Compute Nodes from the

Management Server.

NOTE If you are installing ClusterPack on Compute Nodes for the first

time,

DO NOT power up the systems. ClusterPack will do that for you

automatically. If you do accidentally power the compute nodes,

NOT answer the HP-UX boot questions.

Step 6. Power Up the Management Server

Perform a normal boot process for the Management Server.

Step 7. Configure the ProCurve Switch

• Select an IP address from the same IP subnet that will be used for the Compute

Nodes.

• Connect a console to the switch.