ClusterPack V2.5 Release Note
ClusterPack V2.5 Release Note
QuickStart Install Instructions
11
• Log onto the switch through the console.
•Type set up.
• Select IP Config and select the manual option.
• Select the IP address field and enter the IP address to be used for the switch.
Step 8. Copy the License Files to the Management Server
• Put the files in any convenient directory on the Management Server (e.g. /tmp).
Step 9. Install ClusterPack on the Management Server
• Mount and register the ClusterPack DVD as a software depot.
• Install the ClusterPack Manager software (CPACK-MGR) using swinstall.
• Leave the DVD in the DVD drive for the next step.
Step 10. Run manager_config on the Management Server
Provide the following information to the manager_config program:
• The path to the license file(s)
• The DNS domain and NIS domain for the cluster
• The host name of the manager and the name of the cluster
• The cluster LAN interface on the Management Server
• The IP address(es) of the Compute Node(s)
• Whether to mount a home directory
• Whether to configure HP SIM software
Step 11. Run mp_register on the Management Server
Provide the following information to the mp_register program about each
Management card that is connected to a Compute Node:
• IP address
• Netmask
• Gateway IP address
• username and password to connect