ClusterPack V2.5 Release Note
ClusterPack V2.5 Release Note
Comprehensive Install Instructions
22
7. Unexport the DVD file system.
% exportfs -u -i /mnt/dvdrom
8. Unmount the DVD.
% /etc/umount /mnt/dvdrom
How to enable a DVD as a software depot
During the installation process, two DVDs will be required. Generic instructions for
making a DVD accessible as a software depot for installation onto the Management
Server are provided here. Please refer to the steps that follow for the specific DVDs
that are required.
The steps to mount a DVD for use as a software depot are:
• Insert the DVD into the drive.
• Mount the DVD drive locally on that system.
• Register the depot on the DVD using swreg.
• Check the contents of the DVD using swlist.
These commands can only be executed as the superuser (i.e. root).
A DVD drive installed in the Management Server can be used for software
installations. If the Management Server does not include a DVD drive, use one of
the following two methods.
1. Connect a portable DVD drive to the Management Server.
2. Use an HP-UX system with a DVD drive that is network accessible from the
Management Server, as a source for installation.
For example, to mount the device /dev/dvdrom to the directory /mnt/dvdrom,
execute the following commands on the “source machine” with the DVD drive.
% /sbin/mount -r /dev/dsk/xxx /mnt/dvdrom
% /usr/sbin/swreg -l depot /mnt/dvdrom
% /usr/sbin/swlist @ /mnt/dvdrom
• Using the ClusterPack DVD, mount and register the DVD as a software depot.
• Install the ClusterPack Manager software (CPACK-MGR) on the Management
Server using swinstall.