HP Process Resource Manager User's Guide

Monitoring PRM through SNMP
Accessing PRM’s SNMP data
Appendix C238
You can limit the data displayed by choosing a lower level item. For
example, to display only information on application records, enter the
following command:
# /opt/OV/bin/snmpwalk \
hostname hp.hpSysMgt.hpUXSysMgt.hpPRM.prmReadOnly.applResource
Using OpenView’s xnmbrowser
NOTE Secure sites may want to disable prmagt to avoid unwanted information
exchange. If prmagt is to be used, it is strongly recommended that it be
used only on a trusted internal network protected by firewalls and access
controls, due to known issues with the SNMP protocol.
To use xnmbrowser to view the PRM data:
Step 1. If PRM’s SNMP agent is not already running, start it on each system
from which you want to view data:
# /opt/prm/bin/prmagt
If you need to stop the agent, use its -stop option.
You can have the agent automatically start at boot by setting the
PRM_SNMPAGT variable in the file /etc/rc.config.d/prm to 1:
PRM_SNMPAGT=1
Step 2. Start xnmbrowsesr:
# /opt/OV/bin/xnmbrowser