HP Process Resource Manager User's Guide

Using PRM with HP System Management Homepage (SMH)

Quick start to using PRM’s SMH interface

Chapter 588

Step 3. Navigate to the PRM interface by following the links:

Tools

-> Resource Management -> Manage PRM Groups

NOTE If the above links are not present, run the following command:

# /opt/prm/bin/prmsmhconfig -c

and log in to SMH again as indicated in Step 2.

Step 4. Create your conﬁguration ﬁle.

For help in determining the resource allocations in your initial

conﬁguration, see “Using prmanalyze to quickly identify resource use”

on page 81.

For conﬁguration tips, see “Conﬁguration tips and requirements” on

page 102.

To create conﬁguration ﬁles, once you navigate to the PRM interface,

select the Conﬁgure tab.

For information on how to use SMH to create the conﬁguration, see the

online help.

Step 5. Load the conﬁguration.

There are two types of loads:

• Move processes to assigned groups

To initialize, moving user processes to the owners’ initial groups and

moving applications to their assigned groups

• Keep processes in current groups

To keep the existing assignments of users, processes, and groups

On the Conﬁgure tab, select the desired type of load and select the Load

button. Any resource managers needed based on the types of records in

the conﬁguration will be automatically started.