HP Process Resource Manager User's Guide

Using PRM with HP Systems Insight Manager (SIM)
Quick start to using PRM’s SIM interface
Chapter 6 95
Quick start to using PRM’s SIM interface
The following steps outline how to use PRM’s SIM interface. For more
information on configuring PRM using the SIM interface, see the PRM
online help.
Step 1. Determine which configuration model you are going to use.
For information on planning your configuration, see “PRM configuration
planning” on page 71.
Step 2. Log in to HP Systems Insight Manager by pointing your web browser to:
http://SIM_host:280
where SIM_host has SIM and the bundle PRMSIMTools C.03.03.01 or
later installed.
SIM documentation is available on http://docs.hp.com by selecting the
Network and Systems Management link.
Step 3. Navigate to the PRM interface by following the links:
Optimize -> Process Resource Manager -> Configure PRM Groups
NOTE If the above links are not present, run the command
/opt/prm/bin/prminitconfig -a (or preferably
/opt/vse/bin/vseinitconfig -a if HP Virtual Server Environment
Management Software A.03.00.00 or later is installed) and log in to SIM
again as indicated in Step 2. (Be aware that running vseinitconfig -a
will restart SIM.)