HP-UX Reference (11i v2 03/08) - 4 File Formats (vol 8)

snmpd.conf(4) snmpd.conf(4)

location: 1st Floor near Mens Room

# Specify Bob Jones is responsible for this agent

# and his phone number is 555-2000

contact: Bob Jones (Phone 555-2000)

# Create a SNMPv3 user ’v3usr’ with No Authentication Protocol.

usmUserEntry localSnmpID v3usr usmNoAuthProtocol 1.3.6.1.6.3.10.1.2.1 \

nonVolatile whereValidRequestsOriginate -

# Create a SNMPv3 user ’v3usr’ with Authentication enabled and

# password as "passwd".

usmUserEntry localSnmpID v3usr usmHMACMD5AuthProtocol 1.3.6.1.6.3.10.1.2.1 \

nonVolatile whereValidRequestsOriginate "passwd"

# Create a group ’admin’ and make the user ’v3usr’ a part of the

# same group.

vacmSecurityToGroupEntry usm v3usr admin nonVolatile

# Assign access control the group ’admin’. This group will have

# security protocol as no authentication and no privacy

vacmAccessEntry admin - usm noAuthNoPriv prefix All All - nonVolatile

# ’All’ is the name of the view that will define the access for the

# group ’admin’. Give access to the view named ’All’. The access is

# for the subtree ‘internet’ i.e. .1.3.6.1

vacmViewTreeFamilyEntry All 1.3.6.1 - included nonVolatile

# Create a target address entry for 192.168.40.40 with UDP port as 0.

# If SNMP_TRAP_TEST_ENTRY or SNMP_TEST_PORT_ENTRY are not used,

# default value of UDP port 162 will be used.

snmpTargetAddrEntry stae2 1.3.6.1.6.1.1 192.168.40.40:000\

whereValidRequestsOriginate - nonVolatile 255.255.255.255:0 2048

AUTHOR

snmpd.conf was developed by Hewlett-Packard Company.

FILES

"HP-UX 11.X and Solaris 2.X"

/etc/SnmpAgent.d/snmpd.conf