HP-UX SNAplus2 R7 Administration Guide
Configuring APPC Communication
Configuring APPC Security
To configure conversation security, use one of the following methods:
Motif administration program
Select
APPC,
Security, and
Conversation-level security
from the
Services menu on the Node window.
Command-line administration program
Issue the following command:
define_userid_password
Conversation Security Configuration Parameters
The following parameters are required for conversation security configuration:
User ID
The user ID to be accepted in an incoming conversation from a remote node. The user ID can be up to 10
characters long.
Password
The password to be accepted in an incoming conversation from a remote node. The password can be up to
10 characters long.
Additional Configuration
After configuring conversation security, you can configure 5250 communication as described in Chapter 8,
Configuring User Applications.
7.7.3 Configuring a Security Access List
You can define an APPC security access list to control access to an LU or TP (or both). This list can be referred
to by the definition for an APPC local LU or TP.
To configure a security access list, use one of the following methods:
Motif administration program
Select
APPC, Security, and Conversation-level security
from the
Services menu on the Node window, then select
the Security Access Lists pane and choose
New.
Command-line administration program
Issue the following command:
define_security_access_list
Security Access List Configuration Parameters
The following parameters are required for security access list configuration:
Name
Name of the security access list. The definition for an APPC TP or local LU can use this name to refer to
the access list.
Users in access list
The names of users included in the security access list.
Additional Configuration
After performing the security access list configuration, continue with the following configuration tasks:
• Configure TP access as described in Section 7.4, Defining TPs.
122