HP-UX SNAplus2 R7 Administration Guide
Managing SNAplus2 Client/Server Systems
Managing Win16 Clients
data = YES | NO
send = YES | NO
receive = YES | NO
[Appl_Name]
APPCTPN = tp_name
APPCLLU = lu_name
[CSV_data]
CSVTBLG = table_G_filename
Note
The domain = domain_name line is the only required line in this file.
The following sections explain the contents of the file. Where a parameter in the file takes the values YES or NO,
any string beginning with Y or y is interpreted as YES, and any string beginning with N or n is interpreted as NO.
[Configuration]
The [Configuration] section of the file contains configuration information for the client, as follows:
domain
The domain_name argument indicates the domain name of the SNAplus2 LAN, as specified during the client
installation. This line is required.
snauser
The user_name argument indicates the user name of the SNAplus2 user on this client. This name was specified
during the client installation.
• If the client will be running 3270 or 5250 emulation, and you want to configure the user explicitly instead
of using the default emulator user configuration, this name must be defined as an emulator user name
in the SNAplus2 configuration, using the define_emulator_user command. For more information,
see Section 8.1.1, Configuring 3270 Emulator Users or Section 8.2.1, Configuring 5250 Emulator Users.
• Otherwise, this line of the file is optional. If this argument is not specified, 3270 or 5250 users on the
client can use either a record defined for a group of users (see the snagroup parameter) or the <DEFAULT>
user record, if any, in the domain configuration file.
snagroup
The group_name argument indicates the group name of the SNAplus2 user on this client. This name must
match the SNAplus2 configuration on servers, as follows:
• If the client will be running 3270 or 5250 emulation, and you have set up the SNAplus2 configuration
to include emulator records for groups of users rather than an individual record for each user, this name
must match the name of an emulator user record that is defined for use by a group of users. Emulator user
records are defined using the define_emulator_user command; for more information, see Section
8.1.1, Configuring 3270 Emulator Users or Section 8.2.1, Configuring 5250 Emulator Users.
• If you have not set up emulator user records for groups of users, this line of the file is optional. If neither
the user name nor the group name is specified, 3270 or 5250 users on the client can use the <DEFAULT>
user record, if any, in the domain configuration file.
• If the client will not be running 3270 or 5250 emulation, this line of the file is not required.
invoked_tps
Specify one of the following values:
YES
161