HP-UX SNAplus2 R7 Administration Guide

Appendix AConfiguration Planning Worksheets
AppendixA Configuration Planning Worksheets
This appendix provides worksheets for configuring specific functions of SNAplus2. The worksheets summarize
the basic configuration parameters needed to enable each function; for information about advanced configuration
parameters, see the appropriate section in the body of this book, or refer to
HP-UX SNAplus2 Administration
Command Reference.
To gather all of the information needed to configure a node, you must complete worksheets in the following
categories:
Node configuration
Complete one of the worksheets contained in Section A.1, Node Worksheets, depending on the capabilities of
the node and the characteristics of the network in which it operates.
Connectivity configuration
Complete one or more of the worksheets contained in Section A.2, Connectivity Worksheets, depending on
the link protocols used to communicate with the other systems in your network.
Passthrough services configuration
Complete the worksheets in Section A.3, Passthrough Services Worksheets, for any passthrough services to
be supported by the node.
Application support configuration
Complete one or more of the worksheets contained in Section A.4, User Application Support Worksheets,
depending on the types of user applications to be supported by the node.
A.1 Node Worksheets
Complete only one of the following worksheets:
• Section A.1.1, APPN Network Node
• Section A.1.2, APPN End Node
• Section A.1.3, APPN Branch Network Node
• Section A.1.4, LEN Node
A.1.1 APPN Network Node
Complete this worksheet if the local node is an APPN network node (a node that provides routing services in an
APPN network).
Motif Field Valid Entry/Notes Your Implementation Value
Node Parameters Dialog
APPN support Network node
Control point name
NETNAME.CPNAME (each 1–8 type A
EBCDIC characters)
To connect to a VTAM host, this name must
match the NETID= and CPNAME= entries in
the VTAM PU statement.
173