HP-UX SNAplus2 R7 Administration Guide
Appendix AConfiguration Planning Worksheets
Motif Field Valid Entry/Notes Your Implementation Value
Control point name
NETNAME.CPNAME (each 1–8 type A
EBCDIC characters)
To connect to a VTAM host, this name must
match the NETID= and CPNAME= entries in
the VTAM PU statement.
Control point alias
Up to 8 characters
Node ID
8 hexadecimal digits
Connectivity Configuration: See Section A.2, Connectivity Worksheets.
Client/Server Configuration: Not required for a standalone node.
Configuration server?
Should the node act as a configuration server, to
store information about domain resources in the
SNAplus2 LAN?
Application Configuration: See Section A.4, User Application Support Worksheets.
A.1.4 LEN Node
Complete this worksheet if the local node is a LEN node (a node that does not support APPN functions or a
standalone system that communicates only with a host computer).
Motif Field Valid Entry/Notes Your Implementation Value
Node Parameters Dialog
APPN support LEN node
Control point name
NETNAME.CPNAME (each 1–8 type A
EBCDIC characters)
To connect to a VTAM host, this name must
match the NETID= and CPNAME= entries in
the VTAM PU statement.
Control point alias
Up to 8 characters
Node ID
8 hexadecimal digits
Connectivity Configuration: See Section A.2, Connectivity Worksheets.
Client/Server Configuration: Not required for a standalone node.
Configuration server?
Should the node act as a configuration server, to
store information about domain resources in the
SNAplus2 LAN?
Application Configuration: See Section A.4, User Application Support Worksheets.
A.2 Connectivity Worksheets
For each link protocol used to communicate with another node, complete one of the following worksheets. If
necessary, you can configure more than one link station on a port.
175