HP-UX SNAplus2 R7 Administration Guide

Appendix AConfiguration Planning Worksheets
• Section A.2.1, SDLC
• Section A.2.2, Token Ring
• Section A.2.3, Ethernet
• Section A.2.4, FDDI
• Section A.2.5, QLLC (X.25)
• Section A.2.6, Enterprise Extender (HPR/IP)
A.2.1 SDLC
Complete this worksheet to support connectivity using the SDLC link protocol.
Motif Field Valid Entry/Notes Your Implementation Value
SDLC Port Dialog
SNA port name
Up to 8 characters
SDLC card number 0 to number_of_cards_minus_1
Port number 0 to number_of_ports_on_card_minus_1
Initially active
Select if needed
Line Details
Type Leased line
Switched outgoing
Switched incoming
Link role Negotiable
Primary
Primary multi-drop
Secondary
Secondary multi-PU
For switched incoming or leased line:
Poll address
Only for nonprimary, switched incoming ports
On a VTAM host, the poll address is configured
as the ADDR= parameter in the VTAM PU def-
inition.
On an AS/400 system, the poll address is the
STNADR parameter of the Line Description.
Encoding
NRZ or NRZI (only for switched incoming or
leased port)
On a VTAM host, this is the NRZI= setting in
the LINE/GROUP definition.
Duplex Setting
Half Duplex
Full Duplex
(only for switched incoming or leased port)
176