HP-UX SNAplus2 R7 Administration Guide

Appendix AConfiguration Planning Worksheets
Motif Field Valid Entry/Notes Your Implementation Value
Physical link type
Select modem type
Dial string
String for modem initialization (only for Smart
Modem or V.25 switched incoming ports)
SDLC Link Station Dialog
Link station fields
Name
Up to 8 characters
SNA port name
Up to 8 characters
Activation By administrator
On node startup
On demand
LU traffic Any
Independent only
Dependent only
Independent LU traffic
Remote node
NETNAME.CPNAME (each 1–8 type A
EBCDIC characters; optional)
If the remote system is a VTAM host, you can
find the network name (the first eight characters
of the fully qualified name) in the NETID pa-
rameter of the VTAM start list. The last eight
characters are in the SSCPNAME parameter of
the VTAM start list.
Remote node type Discover
Network node
End or LEN node
Dependent LU traffic
Remote node role Host
Downstream (PU Concentration)
Downstream (DLUR)
Local node ID 8 hexadecimal digits (defaults to node name)
In a VTAM configuration, the first three digits
should match the IDBLK parameter in the PU
definition, and the last five should match the
IDNUM parameter.
On an AS/400 system, the node ID is config-
ured in the EXCHID parameter.
177