HP-UX SNAplus2 R7 Administration Guide

Appendix AConfiguration Planning Worksheets
Motif Field Valid Entry/Notes Your Implementation Value
Remote node ID
8 hexadecimal digits (optional)
Downstream PU name
1–8 type A EBCDIC characters
Upstream DLUS name
NETNAME.LUNAME (each 1–8 type A
EBCDIC characters)
Contact information
Poll address For switched incoming ports, only configured
on the port.
2 hexadecimal digits:
• C1 for point-to-point
• 0xFF for primary switched outgoing (desti-
nation address unknown)
• Unique addresses for primary to multi-drop
On a VTAM host, the poll address is configured
as the ADDR= parameter in the VTAM PU def-
inition.
On an AS/400 system, the poll address is the
STNADR parameter of the Line Description.
Line encoding
NRZ or NRZI (only for switched outgoing calls)
On a VTAM host, this is the NRZI= setting in
the LINE/GROUP definition.
Duplex Setting
Only for switched outgoing calls:
• Half Duplex
• Full Duplex
Dial string
Only for switched outgoing calls
A.2.2 Token Ring
Complete this worksheet to support connectivity using the token ring link protocol.
Motif Field Valid Entry/Notes Your Implementation Value
Token Ring SAP Dialog
SNA port name
Up to 8 characters
Token ring card number 0 to number_of_cards_minus_1
Local SAP number
Hexadecimal (multiple of 4)
Initially active
Select if needed
Define on connection
network
Select if needed
CN name
NETNAME.CNNAME (each 1–8 type A
EBCDIC characters)
178