HP-UX SNAplus2 Release Notes (September 2008)(Version R7.11.11.300)

HP-UX SNAplus2 R7.11.11.300 Release Notes
Known Problems and Workarounds
Chapter 16
Known Problems and Workarounds
The following are known problems in this version:
• To use SNAplus2 on HP-UX 11i to control a large number of resources (hundreds of
sessions or conversations), HP recommends that you install the following O/S patch:
PHKL_23445. This patch is available to download at http://www.itrc.hp.com.
• You cannot use SDLC with this release of SNAplus2 if an ACC card is installed in the
system. The only way to add an ACC port using this release is to allow a machine running
SNAplus2 R6.1 to manage ACC port functionality on a machine running R6.0 in a
client/server environment only. No physical SNAplus2 SDLC ACC links can exist on a
machine running SNAplus2 R6.1.
• SNAplus2 Release 5.x and SNAplus2 Release 7.x cannot co-exist in a mixed Client/Server
environment because SNAplus2 Release 5.x servers do not support Release 7.x systems.
If you are running an SNAplus2 Release 5.x Client/Server environment, and you install a
new system with SNAplus2 Release 7.x software, you must upgrade all of the SNAplus2
Release 5 systems to SNAplus2 R7.x to maintain compatibility.
For details on restrictions, refer to the HP-UX SNAplus2 Upgrade Guide.
• To support the PCI Gigabit card, you need to install the following patch:
PHNE_28923