HP-UX SNAplus2 RJE User's Guide

SNAplus2 RJE Commands
snaprjestat
Chapter 4106
As an RJE user, you may check on the status of workstation devices and
LUs. For example, you may wish to see if workstation LUs are active and
connected to a host. The snaprjestat command displays the following
information for workstation devices:
WKST
The name of the RJE workstation.
device
The name of the device owned by the workstation. This
name can be a printer (PRT n ), punch (PUN n ), console
(CONS), or reader (RDR1) device ( n is a one digit
decimal number.)
status
Each workstation device will have a status of one of the
following:
Active
Currently receiving or transmitting
data.
Inactive
Currently no activity for this device.
Suspended
The host has suspended this device.
LUname
The name of the LU being used by this device. If a
device is inactive, the LU name is displayed as *.
action
If a device is inactive, action is displayed as *. For
Active or Suspended devices, action may be one of the
following:
Output to type name
For printers and punches, type
indicates whether the output is being
sent to a program, a directory, or a