HP-UX SNAplus2 RJE User's Guide

SNAplus2 RJE Console Program
Using the Console Program
Chapter 5122
Using the Console Program
The RJE console program allows you to do the following:
• Enter host JES commands, and view the host's responses.
• View earlier console information (commands that you have entered
and output from the host).
• Perform a temporary exit to the HP-UX command prompt, leaving
the console program running.
These options are discussed in the following sections.
Entering Host Commands
To enter a host command, simply type the text of the command and press
Return. It appears on the reverse-video command input area at the
bottom of the console screen. After you press Return to send the
command, it is echoed on the console screen and removed from the
command input area.The syntax of these commands is defined by the
host. See your host JES documentation for more information on the
commands you can use.
If you make a mistake while typing the command, use the following keys
to correct it.
• Backspace
• Left arrow to move to the left
• Right arrow to move to the right
• CTRL-T to move to the end of the line.
• CTRL-W to move to the start of the line
• ESC to clear the command input area without sending the command
so that you can start again
• Insert char to toggle between insert mode and replace mode. In insert
mode, a character you type is inserted at the current cursor position.
In replace mode, a character you type overwrites the character at the
current cursor position. The status line displays the indicator INSERT
or REPLACE to remind you which mode you are in.