HP-UX SNAplus2 RJE User's Guide

SNAplus2 RJE Workstation Configuration
RJE Style File Records
Chapter 6150
For each of the channels 2 to 12, specify a line number,
between the values of the first_line and
form_length parameters above. Alternatively, if you
specify zero for a particular vertical channel position,
the output device will simply interpret the “go to
vertical channel n ” instruction as a line feed.
define_ws_device
The define_ws_device record defines a printer or punch device used for
processing RJE output. Up to 9 printer and 9 punch devices may be
defined for each workstation. Each device, identified by its device type
(printer or punch) and device number (1 - 9), must match a device
defined at the host for this workstation.
Some host systems make a distinction between punch devices and
exchange devices, and require the use of exchange devices for
transferring data records of more than 80 bytes. SNAplus2 does not
make this distinction, because it does not impose a restriction on the
record length for punches.
If the host requires output to be sent to an exchange device, you can
include this in the RJE style file using a punch device. Any output for
exchange device n will be routed to the punch device n . For example, if
the host specifies that an output device is exchange device number 3, you
need to define a punch with device number 3 for the workstation, and
output for this exchange device will be sent to punch number 3. Note
that in this case, the host configuration must not also include a punch