HP-UX SNAplus2 RJE User's Guide

SNAplus2 RJE Workstation Configuration
RJE Style File Records
Chapter 6 151
device number 3. Problems may occur if the host attempts to route
outputs from two different jobs to a punch and an exchange device that
have the same number.
description
An optional text string describing the device. This
string is for information only. It is stored in the style
file and displayed in the RJE style file customization
program.
device_number
The number that the host uses to identify this device,
in the range 1 - 9. This must not match the device
number of any other device of the same type (printer or
punch, as specified by the device_type parameter)
defined for the workstation.
The host configuration identifies each printer or punch
only by its number. The range of numbers for each
device type is always consecutive and starts at 1. For
example, if two printers and three punches are defined
at the host, they will be assigned printer numbers 1
and 2 and punch numbers 1, 2, and 3. You must set up
the number for each device so that the range of
numbers for each device type is consecutive and starts
at 1 to ensure that the SNAplus2 configuration
Table 6-4 Notification Values
Parameter Name Type Length Default
[define_ws_device]
description
device_number
device_type
form_name
translate_data
translate_transp_data
concatenate
output_type
pdir_passthrough
add_punch_nl
output_path
output_file
character
decimal
constant
character
constant
constant
constant
constant
constant
constant
character
character
31
8
256
(see
notes)
(null string)
PUN
(null string)
YES
YES
YES
DIR
NO
YES
/var/opt/sna/rje/
WKST /output