HP-UX SNAplus2 RJE User's Guide

Introducing SNAplus2 RJE
SNAplus2 RJE Features
Chapter 124
SNAplus2 RJE accepts PDIRs (Peripheral Data
Information Records ) from the host. These PDIRs can
be stored in a file associated with the output or passed
as parameters to a program that processes the output.
Code Conversion
Data can be translated from ASCII to EBCDIC when it
is sent to the host, and from EBCDIC to ASCII when
output is received from the host. It can also be sent or
received as binary data without code conversion .
Exchange Data
SNAplus2 RJE supports sending and receiving
exchange data.
Modifiable Data Record Size
In addition to the default record lengths of 80 bytes for
punch data and 128 bytes for exchange data, SNAplus2
RJE allows data to be sent in records of any size from
80 bytes to 248 bytes. Note that the use of exchange
data and record lengths other than 80 bytes depends on
the host system's support for them.
Inbound and Outbound Compression
SNAplus2 RJE supports compression both on
transferring data to the host and on receiving data
from the host. File compression can improve the
processing time for a job if you are submitting large
files. Note that the use of compressed data depends on
the host system's support for it.
Multiple LUs per Workstation
As many as five LUs on the same host connection may
be configured for each RJE workstation.
usr card output routing
SNAplus2 RJE allows you to configure a device to send
output to the rjeusr and rjeusrpad programs which
route output according to usr card specifications.
Padding of Punch Records