HP-UX SNAplus2 RJE User's Guide

SNAplus2 RJE Components and Operation

Running the RJE Workstation

Chapter 3 65

Apart from the subdirectories output and .pgmout (temporary ﬁles for

output to pr ograms), you cannot access these ﬁles and directories

directly. They are for internal use by RJE programs.

If the required ﬁles and directories do not already exist from a previous

run of the workstation, SNAplus2 RJE creates them when you start the

workstation or submit a job. Since you may require these ﬁles and

directories later, the workstation program does not remove them when it

stops running. As a result, you can spool jobs for the workstation while it

is not running.

Clearing a Workstation’s Directories

You can remove all the ﬁles and directories associated with a

workstation, using the snaprjeclr command. For example,

snaprjeclr RJE1

The ﬁles and directories will be rebuilt if a new job is submitted for the

workstation or if the workstation is restarted. You must use the

command on the computer where the RJE workstation is conﬁgured, and

the SNAplus2 software must be started on that computer.

This command is for SNA user or root only. Use this command only if a

workstation is no longer being used and has been removed from the

conﬁguration or if a serious error has occurred. Clearing the

workstation’s directories will remove the following:

• any spooled jobs

• stored status information for sent jobs

• ﬁle on the default output directory

• stored history of console activity

See the command description “snaprjeclr” in Chapter 4 for more

information on this command.

If you need to remove individual ﬁles from directories other than the

output directory (for example, to clean up after a serious error condition),

you must log on as root, since the ﬁles are protected. See your system

administrator if you need to remove ﬁles and do not have the necessary

privilege.