HP-UX SNAplus2 RJE User's Guide

SNAplus2 RJE Components and Operation
Getting Information About RJE Jobs
Chapter 3 73
RJE: RJEF rjeusr/rjeusrpad has routed output for PUN2
usr logon = bill
Filename = /home/bill/file1
Cause: rjeusr or rjeusrpad has successfully routed an output file to the
indicated file name.
Action: No action is required.
------------------ 13:00:20 PDT 09 Apr 1996 ------------------
RJE Message 32770 - 67, Subcode: 0 - 1
Log category: AUDIT Cause Type: Audit
System: hpntcbf
Process ID: 4176 (rjeusrpad)
RJE: RJEF rjeusr/rjeusrpad has routed output for PUN2.
usr logon = bill
Program = /home/bill/program
Cause: rjeusr or rjeusrpad has successfully routed an output file to the
indicated program name.
Action: No action is required.
RJE Job Log File
Entries are written to the RJE job log file only if the job_logs option is
set to YES in the workstation’s style file. (For more information on
setting this option, see Chapter 6 of this manual.) If this option is set,
SNAplus2 writes an entry to the file each time a job is spooled to the
workstation, sent to the host or cancelled, and each time output is
received from the host.
The file is a text file that can be viewed using a standard ASCII text
editor. Each entry in the file consists of two lines: the first gives the date
and time at which the entry was written, and the second gives details of
the event that caused the entry. The example below shows some typical
entries.