HP-UX SNAplus2 RJE User's Guide

SNAplus2 RJE Commands
snaprjelst
Chapter 4 97
snaprjelst
The snaprjelst command lists all the job files on the spool for an RJE
workstation. The default of this command is to list only jobs that have
been submitted either by you or by other users in your group and have
not yet been sent to the host. However, by using the -s or -b option with
the snaprjelst command, you can list jobs sent or both jobs waiting and
sent.
You must use this command on the computer for which the RJE
workstation is configured, and the SNAplus2 software must be started
on that computer. However, the RJE workstation need not be running.
See your system administrator if necessary, or refer to the HP-UX
SNAplus2 Administration Guide for information on RJE workstation
configuration or for information on starting the SNAplus2 software.
Syntax
snaprjelst [ -s | -b ] [-l] [-a] WKST
Options
[-s]
The -s option is for “sent jobs only”. By default, the
snaprjelst command lists only jobs that have been
submitted but not yet sent to the host. This includes
jobs that are currently being sent, or jobs for which
send attempts have failed. The -s option lists only jobs
that have been successfully sent to the host (see also -b
below).
-b
The -b option is for “both waiting jobs and sent jobs”.
This option lists all submitted jobs, regardless of
whether they have been successfully sent to the host
(see also -s above).
-l