Administrator's and User's Guide for SFM HP-UX 11i v1 April 2006

Administering Indications and Instances Using HP SMH
Tracing EVWEB
Chapter 4 101
To change the default location of the sfm.log file, you must configure the
/opt/sfm/conf/fmloggerconfig.xml file.
You can enable tracing for an EVWEB session. A session is the duration
between a login and a logout. When you enable tracing, make sure that
you set a trace level. EVWEB logs traces for a session for the set trace
level. At the end of a session, tracing is automatically disabled. In an
active session, the trace level remains valid until you modify it.
The traces for a session are also logged in the samlog.log. The path to
the samlog.log file is /var/sam/log/samlog.log. From the GUI, you
can access the samlog.log file from HP SMH home page -> Logs ->
Samlog. The samlog.log file contains all the administrative commands
executed on a system. The errors generated during the execution of these
administrative commands are also stored in the samlog.log file.
NOTE Tracing is available for administrators only. However,
non-administrators can view the trace files.
Module Name Displays the name of the
module or the providers that
logged the message in the
sfm.log file, for example,
EVWEB_CLI, FMDProviders.
Severity Displays the severity of the
message logged in the
sfm.log file.
Process ID Displays the 10-digit process
ID.
Thread ID Displays the thread ID.
Message Displays the text message.
Table 4-1 Entries in sfm.log (Continued)
Field Description