Administrator's and User's Guide for SFM HP-UX 11i v1 April 2006

Troubleshooting SFM
Troubleshooting Indication Providers
Chapter 5114
If the status displayed is not OK, the provider module is not registered
properly. To register the provider module, enter the following command
at the HP-UX prompt:
# cimmof -nroot/PG-InterOp
/opt/sfm/schemas/mof/SFMProvidersR.mof
If no errors messages are displayed, the provider module is registered
properly. If errors are displayed, restart the CIMOM by entering the
following command at the HP-UX prompt:
# cimserver
After the CIMOM restarts, enter the following command at the HP-UX
prompt to register the provider module:
# cimmof -nroot/PG-InterOp
/opt/sfm/schemas/mof/SFMProvidersR.mof
After the provider module is registered, create a link between the SFM
providers and the CIMOM by entering the following command at the
HP-UX prompt:
# ln -s /opt/sfm/lib/libsfmproviders.1
/opt/wbem/providers/lib/libsfmproviders.sl
To check whether the link is created, enter the following command at the
/opt/wbem/providers/lib directory:
# ls
Following is a sample output indicating that the link is created:
# lrwxr-xr-x 1 root sys 30 Jan 12 6:56
libsfmproviders.sl -> /opt/sfm/lib/libsfmproviders.1
If the link is already present, the following error message appears:
# ln: /opt/wbem/providers/lib/libsfmproviders.sl exists
Cause 3
The provider is not registered under the module.
Solution
To check whether the provider is registered under a module, enter the
following command at the HP-UX prompt:
# cimprovider -l -m SFMProviderModule