Administrator's and User's Guide for SFM HP-UX 11i v1 April 2006

Troubleshooting SFM

Troubleshooting Indication Providers

Chapter 5 117

</KEYBINDING>

hpdst348

</KEYVALUE>

</KEYBINDING>

</INSTANCENAME>

</VALUE.REFERENCE>

</KEYBINDING>

</INSTANCENAME>

Cause 5

The indication providers are not loaded properly.

Solution

To check whether the EMS Wrapper Provider is loaded properly,

complete the following steps:

Step 1. Open the /opt/sfm/conf/FMLoggerConfig.xml file.

Step 2. Using an editor, change the severity of logs from WARNING to

INFORMATIONAL.

Step 3. Enter the /opt/sfm/bin/fmdcontrol command with the

/opt/sfm/conf/FMLoggerConfig.xml option:

# /opt/sfm/bin/fmdcontrol /opt/sfm/conf/FMLoggerConfig.xml

Step 4. Enter the following command to generate a sample indication:

# /etc/opt/resmon/lbin/send_test_event <monitor_name>

For example:

# /etc/opt/resmon/lbin/send_test_event disk_em

Events generated by the disk_em monitor are translated into indications

and reported to the CMS. You can view these indications in the Events

List.