Administrator's and User's Guide for SFM HP-UX 11i v1 April 2006

Troubleshooting SFM
Troubleshooting Indication Providers
Chapter 5118
NOTE You can create sample indications using only those monitors that are
supported on your system. For the list of monitors supported on your
system, see the EMS Wrapper Provider Data Sheet posted at:
http://docs.hp.com/en/diag
Step 5. Open the /opt/sfm/log/sfm.log file.
NOTE The /opt/sfm/log/sfm.log file is the file specified in the Target field of
the FMLogger.xml file.
Use the information available in the file to analyze the problem.
Step 6. When you complete testing, revert to the default severity settings in the
FMLoggerConfig.xml file using a text editor. If you do not revert to the
default settings, the logs consume more disk space.
Following is an example of how the sfm.log file is displayed when you
change the logging level to INFORMATIONAL, indicating that the
provider is loaded properly:
04/19/04 03:36:32 EMSWrapper INFORMATIONAL 9596 Using port
49173
04/19/04 03:36:32 EMSWrapper INFORMATIONAL 9596 Provider
Enabled
04/19/04 03:38:03 EMSWrapper INFORMATIONAL 9599 Registration
for /storage/events/disks/default/0_0_0_2_0.6.0 Accepted.
RequestID : 63700993
04/19/04 03:38:03 EMSWrapper INFORMATIONAL 9599 Registration
for /system/events/chassis/chassis_log Accepted. RequestID :
64552961
04/19/04 03:38:03 EMSWrapper INFORMATIONAL 9599 Registration
for
/system/events/core_hw/core_hw Accepted.
RequestID : 65404929