Administrator's and User's Guide for SFM HP-UX 11i v1 April 2006

Installing the SFM Software
Installing the SFM Software from the Web
Chapter 226
Installing the SFM Software from the Web
To install the SFM software from the Software Depot, complete the
following steps:
Step 1. Go to HP Software Depot at:
http://www.hp.com/go/softwaredepot
Step 2. Search for SysFaultMgmt. The Overview page is displayed.
Step 3. Go to the Installation page and review Prerequisites to ensure that your
system meets the requirements.
Step 4. Select the Receive for Free >> option at the bottom right of the page.
Step 5. Select the appropriate release of the HP-UX operating system.
Step 6. Enter your registration information. Read and accept the terms and
conditions.
Step 7. Click Next >> at the bottom right of the page.
Step 8. Click the appropriate link under Download Software to download the
software. Save the software in a local directory on your system, for
example, /tmp/SysFaultMgmt.depot.
Step 9. To install the product, login as superuser and enter the following
command:
# swinstall -s <full path of depot> SysFaultMgmt
For example,
# swinstall -s /tmp/SysFaultMgmt.depot SysFaultMgmt
Step 10. To verify whether the SFM software is installed properly, enter the
following command at the HP-UX prompt:
# swlist | grep SysFaultMgmt
If the SFM software is installed properly, SysFaultMgmt and the version
number appear in the output. If the SFM software is not installed
properly, you must repeat the installation procedure. For more
information, see “Verifying the Installation” on page 27.