Administrator's and User's Guide for SFM HP-UX 11i v3 September 2012

Table 1 Instance providers (continued)
DescriptionInstance provider
Firmware Revision
Management Processor
Enclosure
Temperature Sensor
Indication providers
SFM includes four indication providers, the EMS Wrapper provider, the Event Manager Common
Information Model (EVM CIM) provider, SFMIndicationProvider and MCA indication provider.
Table 2 describes the SFM indication providers.
Table 2 Indication providers
DescriptionIndication provider
The EMS Wrapper provider does the following:EMSWrapperProvider
1. Converts hardware events generated by the EMS Hardware
Monitors into WBEM indications.
2. Reports the WBEM indications to the CIMOM. Using a
WBEM-based management application, such as HP SIM, you
can subscribe to and receive Event Monitoring Service (EMS)
events generated on a remote system. On the system on which
SFM is installed, you can use an SFM tool, called EVWEB, to
view and administer events through the HP SMH interface.
The following EMS Hardware Monitors are supported on HP 9000
servers running the HP-UX 11i v3 operating system:
• LPMC (now CPU) (lpmc_em)
• Memory (dm_memory)
• Core HW (dm_core_hw)
• Chassis Code (dm_chassis)
• Integrity Core Hardware Monitor(ia64_corehw)
• IPMI Forward Progress Log Monitor (fpl_em)
The following EMS Hardware Monitors are supported on HP
Integrity® servers running the HP-UX 11i v3 operating system:
• Corrected Platform Error Monitor (cpe_em)
• IPMI Forward Progress Log Monitor (fpl_em)
• CMC Monitor (cmc_em)
• Itanium Core Hardware Monitor(ia64_corehw)
• Itanium Memory Monitor (memory_ia64)
NOTE: This provider and WBEM to EMS Consumer is not
supported on HP Integrity BL860c i2, BL870c i2 & BL890c i2
Server Blades, HP Integrity rx2800 i2 server, and HP Integrity
Superdome 2.
For a list of EMS Event Descriptions, see:
http://www.hp.com/go/
hpux-diagnostics-online-events
The EVM CIM provider does the following:EvmCimProvider
1. Converts hardware, software, and kernel events generated by
the EVM into WBEM indications.
2. Reports the WBEM indications to the CIMOM. Using a
WBEM-based management application, such as HP SIM, you
can subscribe to and receive EVM events generated on a
remote system. On the system on which SFM is installed, you
12 Introduction