HP-UX SysFaultMgmt (System Fault Management) (SFM) Release Notes (766969-001, March 2014) (Edition: 2)

Table 4 C.07.12.06.01 (continued)
DescriptionDefect ID
Resolution: This issue has been fixed in this release.
Problem: Incorrect de-configuration state in HP_ProcessorChip enumeration in SD2
servers.
QXCR1001300058
Resolution: This issue has been fixed in this release.
Problem: Successful OLAR operations generated PCI error recovery successful event
100160.
QXCR1001309081
Resolution: This issue has been fixed in this release.
Problem: Operational Status of HP_Blade instances not updated after indictment of
blade in BL8x0c i2 and BL8x0c i4 servers.
QXCR1001266977
Resolution: This issue has been fixed in this release.
Problem: WBEM event 100812 was not generated in certain scenarios.QXCR1001290401
Resolution: This issue has been fixed in this release.
Problem: HP_KnownFilter enumeration fails when users create HP/ADMIN defined
subscription in addition to HP_General Filter@1_V1 subscription.
QXCR1001321306
Resolution: This issue has been fixed in this release.
Problem: On BL8x0c i2 and BL8x0c i4 when a DIMM is manually de-configured,
the status of DIMM was shown as DEGRADED instead of STOPPED. The status of blade
QXCR1001292226
as displayed by Integrated Lights-Out 3 Page and Onboard Administrator mismatched
the status as displayed by Blade provider.
Resolution: This issue has been fixed in this release.
Defect fixes in earlier releases
Table 5 Earlier releases
DescriptionDefect ID
Problem: The diagtxd_pid.bin file created by the diagtxt daemon has incorrect
permissions.
QXCR1001304559
Resolution: This issue has been fixed in this release.
Problem: On BL8x0c i2 and BL8x0c i4 servers, the status of the blade(s) as displayed
by the Blade providers mismatched the status of the blade as displayed by the Integrated
Lights-Out 3 Page and Onboard Administrator.
QXCR1001292224
Resolution: This issue has been fixed in this release.
Description: The LID field in event details of HP internal test scenarios always displays
as 0x00000000ffffffff.
QXCR1001178587
Problem: The LID field in the event description of some HP internal test scenarios is always
0x00000000ffffffff irrespective of physical location used for injecting the symptoms.
Resolution: This problem is fixed. The LID field in the event description of some HP internal
test scenarios is displayed as "Not Applicable".
Problem: Group operational status of temperature sensors is not in sync with individual
operational status of sensors.
QXCR1001236889
Resolution: This problem is fixed. The group operational status is updated whenever the
individual sensor status is updated.
Problem: The cprop is not displaying all Power Supply modules immediately after a
system reboot.
QXCR1001143295
SysFaultMgmt (System Fault Management) (SFM) related defects fixes 11