Quick Start Guide

9. When prompted, enter the version of HP-UX you would like to install. Choose the operating system that matches
the OE you used when you set up the Ignite-UX server –“Create the HP-UX OE Configuration Information on
the Ignite-UX Server” (page 12). Note that this is a timed response and will default to the first selection.
Common Errors
TFTP
PXE-E12: Could not detect network connection. Check cable.
Diagnosis: The boot option you created does not have the correct MAC address and so cannot connect to the internet.
Correction: Determine the appropriate MAC address using the procedure described in the section “Add a Network
Entry for the Client to the IP Address File on the Server.” (page 15) and then create a boot option with that MAC
address.
TFTP
PXE-E16: Valid PXE offer not received.
Load of boot option failed: Not Found.
Diagnosis: Diagnosing this error can be difficult. The simplest problem causing this error is that the entry for this
client in the server's /etc/bootptab file is not correct. A more complicated problem is that there are other DHCP
servers on your network causing interference with your Ignite-UX server.
Correction: Check the client's entry in the /etc/bootptab file on the server to make sure it is correct. Otherwise,
contact the systems administrator responsible for the Ignite-UX server.
22 Cold-installing a Client Across the Network