HP Integrity Virtual Machines Installation, Configuration, and Administration Version A.03.50

Warning 7 on item /dev/rdsk/c1t1d3 backing device does not exist.
Warning 8 on item /dev/rdsk/c3t1d0: Device file '/dev/rdsk/c3t1d0' in use by another guest.
Warning 9 on item hostnet: MAC address in use for switch hostnet.
Warning 10 on item offnet: Vswitch offnet is not active.
Warning 11 on item badnet: 'badnet' backing device does not exist.
These problems will prevent HPVM guest myguest1 from booting.
The following example shows how to enable dynamic memory control for the guest myguest1:
# hpvmmodify -P myguest1 -x dynamic_memory_control=1
AUTHORS
The hpvmmodify command was developed by HP.
SEE ALSO
On the VM Host:
hpvm(5), hpvmclone(1M), hpvmcollect(1M), hpvmconsole(1M), hpvmcreate(1M), hpvmdevmgmt(1M),
hpvminfo(1M), hpvmmigrate(1M), hpvmnet(1M), hpvmpubapi(3), hpvmremove(1M), hpvmresources(5),
hpvmstart(1M), hpvmstatus(1M), hpvmstop(1M), p2vassist(1M)
On the Integrity VM guest:
hpvmcollect(1M), hpvminfo(1M), hpvmmgmt(1M), hpvmpubapi(3)
223