HP Integrity Virtual Machines Installation, Configuration, and Administration Version A.03.50

MAC Address : 0xEE8D40584D28
IP Address : Guest halted
Vswitch Port : 1
Guest's Name : armyvm1
MAC Address : 0x8A0F12DD5B48
IP Address : Guest halted
Vswitch Port : 3
Guest's Name : armyvm2
MAC Address : 0x42F86E004C5D
IP Address : Guest halted
Vswitch Port : 4
Guest's Name : armyvm4
MAC Address : 0x762704ACBC4D
IP Address : Guest halted
Vswitch Port : 5
Guest's Name : armyvm4
MAC Address : 0xA286EA9E07FD
IP Address : Guest halted
Vswitch Port : 6
Guest's Name : armyvm3
MAC Address : 0xD2E856A02638
IP Address : Guest halted
Vswitch Port : 2
Packets in : 4193925
Packets out to stream : 0
Packets out to guest : 0
Packets dropped : 46588
Broadcasts : 4147337
Counter 0 : 0
Counter 1 : 0
Counter 2 : 0
Counter 3 : 0
Cycles in : 1369
Cycles out to stream : 0
Cycles out to guest : 0
Cycles switch packet : 1369
Delete the vswitch named switch2:
# hpvmnet -d -S switch2
hpvmnet: Remove the vswitch 'switch2'? [n/y]: y
Delete the vswitch with the vswitch id of 6, skipping the confirmation dialog:
# hpvmnet -d -s 6 -F
Start the vswitch named switch1:
# hpvmnet -b -S switch1
Stop the vswitch named switch1:
y
# hpvmnet -h -S switch1
hpvmnet: Halt the vswitch 'switch1'? [n/y]:
Configure port 2 on vswitch switch1 with VLAN identifier 100:
# hpvmnet -S switch1 -u portid:2:vlanid:100
Display information about VLAN ports configured for the vswitch named myswitch:
# hpvmnet -S myswitch
Name Number State Mode NumberPPA MAC Address IP Address
======== ====== ======= ========= ====== ============== ===============
myswitch 2 Up Shared lan1 0x00306ef3120c 1.2.3.4
[Port Configuration Details]
Port Port Port Untagged Number of Active VM
Number state Adaptor VLANID Reserved VMs
======= ============ ======== ======== ============ ============
228