HP Superdome 2 Partitioning Administrator Guide (5900-2064, November 2011)

Active ILO : 1/1/0/2/2
Firmware Revision : 1.0.30
Total Good Memory Size : 256.0 GB
Total Memory Available : 256.0 GB
Total Interleave Memory : 30.0 GB
Total SLM : 224.0 GB
SLM at next boot : 224.0 GB
ILM granule size : 1024 MB
ILM granule size at next boot : 1024 MB
SLM granule size : 1024 MB
SLM granule size at next boot : 1024 MB
Max number of ILM granules possible : 1024
Max number of SLM granules possible : 1024
User Specified Max number of blades : 8
Max number of blades at next boot : 8
User Specified Max number of vpars : 16
Max number of vpars at next boot : 16
Current boot mode : npars
Next boot mode : npars
Core Intended Active : 0
Parspec Change Policy : Enabled
VGA : Enabled
VGA next boot mode : Enabled
Pending Deletion : no
[Blade]
Enclosure/ Usage/ CPU Memory Use Par Pending
Blade Status* OK/ (GB) On Num Deletion
Indicted/ OK/ Next
Deconf/ Indicted/ Boot
Max Deconf
========== ======================= ========= =============== ==== === ========
1/1 Active Base /OK 8/0/0/8 128.0/0.0/0.0 yes 1 no
1/2 Active Base /OK 8/0/0/8 128.0/0.0/0.0 yes 1 no
* D-Deconfigured I-Indicted
[IOBay]
Enclosure/ Usage/ Par Pending
IOBay Status* Num Deletion
========== ======================= === ========
* D-Deconfigured I-Indicted
Verifying newly created nPartitions using the OA GUI
To verify that the partitions are defined as desired, select the nPartition from the Complex nPartitions
table, and then click the Status tab.
Verifying newly created nPartitions using the OA GUI 41