HP-UX Virtual Partitions Ordering and Configuration Guide (March 2012)

Note that you can use only the tape devices that are already supported for PA-RISC servers
in standalone mode; vPars does not support devices beyond what is supported by the server
itself.
Obsolescence Note
vPars A.03.01 is no longer supported. See “Obsolescence of vPars Releases (page 20).
vPars A.04.02
vPars A.04.02 adds support for the following:
Integrity servers using the sx2000 chipset (firmware update may be required):
HP Integrity Superdome servers
rx8640
rx7640
Note that PHKL_34088 (bootloader patch) is required before performing the hardware
upgrade.
Flexible Administrative Capability
This allows administrators to designate which virtual partitions allow superusers to run virtual
partition commands that affect other virtual partitions. It has been renamed from a security
feature to this as it is not intended to replace current HP-UX security applications. For more
information, see the “Flexible Administrative Capability” chapter in HP-UX Virtual Partitions
Administrator Guide.
Customer-requested Defect Fixes
For more information, see the HP-UX Virtual Partition Release Notes for this release.
Obsolescence Note
vPars A.02.03 is no longer supported. See “Obsolescence of vPars Releases (page 20).
vPars A.04.01
vPars A.04.01 adds support for the following:
Support for HP-UX 11i v2 (11.23) on both the PA-RISC and Integrity platforms:
vPars A.04.xx requires HP-UX 11i v2 May 2005 Update or later
vPars A.03.xx continues to support HP-UX 11i v1
Note that vPars A.04.xx and vPars A.03.xx have different product numbers:
T1335BC vPars A.04.xx for HP-UX 11i v2
T1335AC vPars A.03.xx and vPars A.02.xx for HP-UX 11i v1
For more information, see “Operating Systems (page 23).
Support for both HP Integrity and PA-RISC servers (firmware update may be required).
These Integrity servers are supported:
HP Integrity Superdome servers
rx8620
rx7620
These PA-RISC servers are supported:
HP 9000 Superdomes (PA-RISC)
rp8420 and rp8400
rp7420, rp7410, and rp7405
2.3 Features of vPars Software by Release 15